Miumaeov 62cc Gas Chainsaw 20 Bar Gasoline Powered Chain Saw 2 Cycle Engine Cutting Saw Kit 4000W

Features: Color: Black+Red Material: Metal. Bar Length:20 in Pitch: 0.325'' Sprocket: 7t*0.325'' Chain Width: 0.058'' Power:4000w Gas Displacement:62cc(Cm3) Rotating Speed:12500(Rpm) Highest Speed Chain:15000(M/S) Fuel Capacity: 550(Ml) Oil Capacity: 260(Ml) Voltage:12 V Structure Chart: Guide Chain Installation Step Diagram: Step1: Install the Guide Plate Step2: Install the Chain Step3: Align the Holes to Install the Side Cover and Screw on the Nut Step4: Adjust the Tightness of the Chain Step5: Sleeve Lock Nut Fuel Injection Volume Can Be Adjusted Step1: Add Engine Oil. the Function of Engine Oil Is to Lubricate the Chain, so You Must Wait for the Oil to Spray out Before You Can Go to the Tree. Step2: Add Gasoline. the Ratio of Gasoline to Oil Is 25:1 or 20:1, 20:1 Is Recommended (Must Be Two-stroke Oil, and Mobil Two-stroke Oil Is Recommended). Do Not Use Four-stroke Engine Oil or Other Engine Oil, Otherwise It Will Easily Cause Cylinder Pulling or Other Problems 1. Pull up the Flameout Switch 2. Pull out the Damper 3. Pull the Start Handle Pull the Start Handle 3-6 Times. When You Hear the Machine Banging, Push the Damper Back in, Otherwise the Machine Will Not Start. 4. Close the Damper Turn off the Air Door, Pull the Start Handle 1-3 Times Again, You Can Start Normally Gas displacement: 62CC (cm3).|Rotating speed: 12500(rpm).|Maximum speed chain: 15000(m/s).|Features: automatic oiler, chain brake.|This chain saw is sharp for cutting branches, twigs, bushes, shrubs, and trees.|The saw is waterproof and rust-proof, and easy to clean with water.|It has exceptional hardness and durability.|Suitable for sawing, cutting, pruning, and trimming wood, it is the perfect tool for gardening, word work, and landscaping.|High quality non-slip, comfortable handle, comfortable and easy to cut wood, effectively improve work efficiency.